How It Works/ FAQ

Instructions for Use (Accompanied by a Brochure)

The Easylift comes in four easy to assemble parts:
1 Top Bar, 1 Bottom Bar, 2 Lifting Towers

Accessories include: Webbing Straps and Eyelet Bars (for attachment to lifting bar)

The two support bars retract into themselves to enable the Easylift to be used for:

1 Easy manoeuvre around the store (reduce to 2m length)

2 Determine the width of roll that is to be lifted or wound on. It can be set at 2m, 3m or 4m by placing the pin in the top and bottom bars in the relevant holes.

3 The end frames can be extended to a maximum height of 10 feet (to enable the roll to be lifted and either placed onto the top of a rack or wound on at the same height).

4 The 4 pieces can be disconnected and stored in an area of 1 square metre.

5 The winches are wound manually to raise the roll of vinyl or carpet to the required height to either wind across or lift directly onto the rack. They have an in-built braking system for safety.

6 No manual lifting is involved when using the Easylift.

"Probably the biggest thing to hit the carpet industry since Spangler invented the electric vacuum cleaner"

Web site designed and hosted by CADaptor Solutions